Report Abuse | Email this Ad    Bookmark and Share Share
Post# A809758

Bare Fiber PLC wholesale

Posted on: Monday, 25 December, 2017  22:25
Expires On: Sunday, 25 March, 2018  22:25
Reply to: (Use contact form below)
1: (Not Provided)
 

Technical Information: The Planar Lightwave Circuit: (PLC) splitter is a type of optical power management device that is fabricated using silica optical waveguide technology. Features include: small size, high reliability, a wide operating wavelength, and good channel-to-channel uniformity. The PLC splitter is widely used in PON networks to realize optical signal power splitting. All products meet GR-1209-CORE and GR-1221-CORE requirements. Application: ► Fiber to the point (FTTX); ► Fiber to the home (FTTH); ► Passive optical networks(PON, GEPON); ► Local area networks (LAN); ► Cable television (CATV); ► Telecommunication Networks. Features: ► Wavelength Intensive; ► Low Polarize on Dependence; ► Excellent Mechanical; ► Stability Telecordia GR-1221 and GR-1209; ► Components through TLC-Certified,Conform to YD1117-2001; ► Excellent Uniformity;; ► High Polarization Extinction Ratio & Excellent Uniformity; ► Fiber input: 0.9mm or 250μm fiber for choice; ► Fiber output: 250μm bare fiber (It is benefit for splicing); ► Corning SMF-28e G.657A Fiber. Technical Data: ParameterPort Configuration 1x21x41x81x161x321x64 Fiber TypeSMF-28e Operating Wavelength (nm)1260~1650 Insertion Loss(dB)Typical3.97.010.213.216.219.7 Max4.27.410.713.717.121.2 Loss Uniformity (dB)Max0.40.60.81.21.52.5 Return Loss (dB)Min505050505050 PDL(dB)Max0.20.20.30.30.30.4 Directivity(dB)Min555555555555 Wavelength Dependent Loss(dB)Max0.30.30.30.50.50.8 Temperature Dependent LossMax0.50.50.50.80.81.0 Operating Temperature (℃)-40~+85 Storage Temperature (℃)-40~+85 Note: 1. Above is the parameters for Blockless Fiber PLC Splitter with connectors. 2. Without connectors, the insertion loss will be 0.2dB lower. Mechanical Dimensions: Ordering Information: (1) Configure include, but are not limited to: 1x2, 1x4, 1x8, 1x16, 1x32, 1x64, 2x2, 2x4, 2x8, 2x16, 2x32, 2x64; (2) Optional connectors: LC, SC, FC, ST; (3) The optional end face : UPC, APC; (4) Default fiber length <= 1.5 m can be customized fiber modes are available: single-mode, multi-mode; (5) Optional Fiber Type: G652D, G657A1; (6) Package Type: steel tube bare fiber, steel tube non-blocking, ABS boxes, LGX, a small plug-piece, tray, chassis. International Authoritative Certification: Compliance with the international ISO9001, CE, FCC, RoHS standards. ALTEK strict implementation of standardized management and control of the design, development, production, installation and service. PLC More Family Products: Bare Fiber PLC wholesale website:http://www.altekfibercable.com/plc-splitter/bare-fiber-plc-splitter/

It is NOT ok to contact this poster with commercial interests.

Bookmark and Share Share
8 hits


Contact this User: 
 
Your email: *
Message: *
Attachment:
The following file types are not allowed: exe, com, bat, vbs, js, jar, scr, pif
Maximum file size: 200KB
Security Code: *
Enter the code shown above into this textbox
 
 











  Copyright 2012 BestFreeAds.com. All rights reserved. Disclaimer